Wavlink AC1200 12m Setup Instructions?

To set up the Wavlink Wing AC1200 setup, begin by connecting the device to a power source and ensure that it’s within range of your Wi-Fi router. Use the included Ethernet cable to connect the Wavlink Wing to your router or modem. Once connected, power on the device. Access the Wi-Fi settings on your computer or mobile device and locate the Wavlink network. Connect to it using the default credentials provided in the user manual or on the device label. Open a web browser and enter the default IP address (usually 192.168.10.1) to access the Wavlink setup page. Follow the on-screen instructions to complete the configuration, including selecting your Wi-Fi network, entering the password, and customising settings as needed. After applying the changes, your Wavlink Wing AC1200 should be ready to enhance your Wi-Fi coverage.

How can I manually configure a Wavlink Ac1200?

1. Connect your computer to the Wavlink AC1200 using an Ethernet cable or connect to its default wireless network using the provided credentials.
2. Open a web browser and enter the default IP address of the Wavlink AC1200 in the address bar. The default IP is often 192.168.10.1, but you can check the user manual or the device label for the correct address.
3. Enter the default username and password to log in to the Wavlink AC1200’s web interface. Refer to the user manual or the label on the device for the default login credentials.
4. Once logged in, navigate through the web interface to find the settings related to your configuration preferences. This may include wireless settings, security settings, and network setup.
5. Set up your wireless network by specifying the SSID (network name), security mode (WPA2 is recommended for security), and the wireless password. You may also configure other wireless settings like channel and mode.
6. If you are connecting the Wavlink AC1200 to an existing network, configure the LAN settings. This typically involves setting a static IP address or configuring DHCP settings.
7. After making the necessary changes, save the settings. This might involve clicking a “Save” or “Apply” button within the web interface.
8. After making the necessary changes, save the settings. This might involve clicking a “Save” or “Apply” button within the web interface.
9. Once the configuration is complete, connect your devices to the newly configured Wavlink AC1200 using the updated wireless settings.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap setup.

Wps button for use in Wavlink Ac1200 setup?

• Make sure that your Wi-Fi router or access point supports WPS. Most modern routers do, but it’s always good to check.
• Connect the Wavlink AC1200 to a power source and ensure it is powered on
• Look for the WPS button on the Wavlink AC1200. The button is usually labelled “WPS” and may be located on the device’s housing.
• Press and hold the WPS button on the Wavlink AC1200 for a few seconds. The WPS LED indicator on the device should start blinking.
• Within a short time (usually 2 minutes), press the WPS button on your Wi-Fi router or access point. This will initiate the WPS handshake process.
• Allow the Wavlink AC1200 and the router to establish a connection. The WPS LED on both devices should stop blinking and remain solid, indicating a successful 
• Check the LED indicators on the Wavlink AC1200 to confirm that the WPS setup was successful. The device should now be connected to your Wi-Fi network.
• Devices in the vicinity that support WPS can now be connected to the Wavlink AC1200 by using the WPS feature on those devices. This usually involves selecting the WPS option during the device’s Wi-Fi setup.

Firmware update in wavlink Ac1200 extender ?

1. Go to the official Wavlink website and find the “Support” or “Downloads” section.
2. Locate and download the latest firmware for your specific Wavlink AC1200 extender model.
3. Ensure your computer is connected to the Wavlink AC1200 extender, either through a wired or wireless connection.
4. Open a web browser and enter the extender’s IP address to access its settings.
5. Find the “Firmware Update” section in the settings.
6. Upload the downloaded firmware file using the interface.
7. Initiate the firmware update by clicking “Apply” or “Update.”
8. Allow the extender to complete the update process. Do not interrupt.
9. If prompted, reboot the extender. Check the firmware version to confirm the update

How to login process for wavlink wifi Ac1200 setup?

• Ensure your computer or device is connected to the Wavlink AC1200 WiFi network. You can connect either wirelessly or using an Ethernet cable.
• Open a web browser like Google Chrome, Mozilla Firefox, or Safari.
• In the address bar of the web browser, type the default IP address for Wavlink extenders. This is typically either 192.168.0.1 or 192.168.1.1.

• You will be prompted to enter a username and password. Use the default credentials provided in the user manual or on a sticker on the extender. Common defaults are “admin” for both username and password.
• Click the “Login” or “Sign In” button to log in to the Wavlink AC1200 extender’s web interface.

Wavlink Ac1200 extender setup: reset procedure?

1. Look for the reset button on the Wavlink AC1200 extender. It’s usually a small button located on the side or back of the device.
2. Use a paperclip or a small pointed object to press and hold the reset button. Hold it down for about 10-15 seconds.
3. After holding the reset button for the specified time, release it. The Wavlink AC1200 extender will reboot, and the reset process will be initiated.
4. Allow the extender to complete the reboot process. This may take a minute or two.
5. Once the extender has rebooted, it will be restored to its factory default settings. This includes the default WiFi network name (SSID) and password.